Calculated-industries 4095-C Pocket Reference Guide Uživatelský manuál stáhnout pdf (Strana 13)

elbow ttings can have a different Take-Out

calculation from the eld cut variants.

This function toggles the Elbow types

between the following options:

Butt Weld – Long

Default. Use this option when utilizing

90° long radius or factory 45° long radius

B.W. elbow ttings, or any odd-angle long

radius tting cut from a 90° B.W. elbow.

Butt Weld – Short

Use this option when utilizing 90° short

radius or factory 45° short radius ttings,

or any odd-angle short radius tting cut in

the eld from a 90° B.W. elbow.

Field Cut – Long

Use this option when utilizing long radius

B.W. elbows, or any odd-angle long

radius tting cut from a 90° B.W. elbow,

including a 45° B.W.

Field Cut – Short

Use this option when utilizing short radius

B.W. elbows, or any odd-angle short

radius tting cut from a 90° B.W. elbow,

including a 45° B.W.

Pocket RefeRence Guide — 23

(cont'd)

(cont'd)

KEYSTROKE DISPLAY



(FilledWeight/Foot)

FILL SIZE 13.11634 LB PER FEET



(InternalArea)

AREA SIZE 6.605199 SQ INCH

Elbow Type

The Elbow Type function lets you chose

between long or short radius, and between

factory and eld cut 45º Butt Weld (B.W.)

elbow types. The default value is for long

radius, factory cut 45º B.W. elbow type.

The Elbow option setting has an impact

on the Take-Out calculations as the radii

vary between long and short Butt Weld

ttings. Additionally, factory made 45º B.W.

2593-4095 PipeSizeErrorStickers_1.75x1.75.eps

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 22 23

Komentáře k této Příručce

Žádné komentáře